MXT 14 UK

The MXT 14 is designed for batteries that are put under a lot of strain, making it ideal for commercial vehicles, buses, trucks and CV workshops.

Part no. 56-768

Read more

Description

Headline
Professional 24V battery charging

Body
The MXT 14 professional 8 step 24V battery charger delivers 14A to 24V batteries from 28-300Ah and is suitable for maintenance charging up to 500Ah. Its features include battery diagnosis to establish whether the battery can receive and retain a charge, a Recond mode for restoring and reconditioning stratified and deeply discharged batteries, and a built in temperature sensor for optimised charging regardless of weather conditions. The MXT 14 also has a ‘Supply’ mode so it can be used as a 24V power source.

Features

  • Fully automatic ‘connect and forget’ 8 step charging
  • Patented maintenance charging up to 500Ah
  • Easy to read LED display
  • Safe spark free operation
  • Reverse polarity protected
  • Short circuit proof
  • 2-year warranty

Technical data

Back current drain*
Corresponding to less than 1Ah/month
Back Current Drain TEXT
*) Back current drain is the current that drains the battery if the charger is not connected to the mains. CTEK chargers has a very low back current.
Battery voltage
24V
Battery chemistry
LeadAcid
Start voltage
2.0V
Output
28.8V/31.6V/27.2V, 14A max
Ripple**
Less than 4%
Input
220–240VAC, 50–60Hz, 2.9A max
Ripple TEXT
**) The quality of the charging voltage and charging current is very important. A high current ripple heats up the battery which has an aging effect on the positive electrode. High voltage ripple could harm other equipment that is connected to the battery. CTEK battery chargers produce very clean voltage and current with low ripple.
Ambient temperature
-20˚C to +50˚C
Insulation class
IP44
Warranty
2 years
Warranty Headline
Limited Warranty
Warranty Headline TEXT
CTEK issues this limited warranty to the original purchaser of this product. This limited warranty is not transferable. The warranty applies to manufacturing faults and material defects. The customer must return the product together with the receipt of purchase to the point of purchase. This warranty is void if the product has been opened, handled carelessly or repaired by anyone other than CTEK or its authorised representatives. One of the screw holes in the bottom of the product may be sealed. Removing or damaging the seal will void the warranty. CTEK makes no warranty other than this limited warranty and is not liable for any other costs other than those mentioned above, i.e. no consequential damages. Moreover, CTEK is not obligated to any warranty other than this warranty.